Home > Product > DCS control system > ABB UUA333BE01 HIEE200038R1 Relay output module

  • ABB UUA333BE01 HIEE200038R1 Relay output module
ABB UUA333BE01 HIEE200038R1 Relay output module

ABB UUA333BE01 HIEE200038R1 Relay output module

ABB UUA333BE01 HIEE200038R1 Relay output module

Exchange of SERVOSTAR 600 Only the manufacturer can repair the device. Opening the device voids the warranty. 1. Decommission the device (see chapter 2.3.4 "Decommissioning"). 2. Demount the device (see chapter 2.3.6 "Disassemble"). 3. Send the device to the manufacturer. 4. Install a new device as described in this manual. 5. Setup the system as described in this manual. Exchange of other drive system parts If parts of the drive system ( for example cables) must be replaced, proceed as follows: 1. Decommission the device (see chapter 2.3.4 "Decommissioning"). 2. Exchange the parts. 3. Check all connections for correct fastening. 4. Setup the system as described in this manual

Disposal

 To dispose the unit properly, contact a certified electronic scrap disposal merchant. In accordance with the WEEE-2002/96/EC-Guidelines and similar, the manufacturer accepts returns of old devices and accessories for professional disposal. Transport costs are the responsibility of the sender. Contact Kollmorgen and clarify the logistics.Part Number Scheme Use the part number scheme for product identification only, not for the order process, because not all combinations of features are possible, always.

Standard version 

8 current ratings (1.5 A , 3 A , 6 A , 10 A , 14 A, 20 A, 40 A, 70 A). 4 instrument widths referring to current ratings. Wide range of rated voltage (3x208V –10% to 3x480V +10%). Overvoltage category III acc. to EN 61800-5-1. Shield connection directly at the servo amplifier. 2 analog setpoint inputs. Integrated CANopen (default 500 kBaud), for integration into CAN bus systems and for setting parameters for several amplifiers via the PC-interface of one amplifier. Integrated RS232, electrically isolated, integrated pulse-direction interface. Synchronous servomotors, linear motors and asynchronous motors can be used.

                                               

Superior products

ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series

BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables

Emerson -- modbus card, power panel, controller, power supply, base, power module, switchEPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor

FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch

GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card

HIMA --- DI module, processor module, AI card, pulse encoder

Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM cardMOOG - servo valve, controller, module, power module

NI --- Information acquisition card, PXI module, card, chassis multi-channel control card

WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module

Woodward - Regulator, module, controller, governor

YOKOGAWA - Servo module, control cabinet node unit

Obtain the latest price of ABB UUA333BE01 HIEE200038R1 Relay output module