ABB YB560103-AM DSQC210 Thermocouple output module

The CD-ROM includes an installation program for the setup software. Installation Autostart function activated: Insert the CD-ROM into a free drive. A window with the start screen opens. There you find a link to the setup software DRIVE.EXE. Click it and follow the instructions. Autostart function deactivated: Insert the CD-ROM into a free drive. Click on START (task bar), then on Run. Enter the program call: x:\index.htm (x = correct CD drive letter). Click OK and proceed as described above. Connection to the serial interface of the PC Connect the interface cable to a serial interface on your PC and the PC interface (X6) of the SERVOSTAR 600 (➜ # 178).

Connect

 Connect the interface cable to a serial interface on your PC and to the serial interface X6 of the servo amplifier. USB to serial converter can be used optionally. Switch on the 24 V power supply for the servo amplifier. Wait about 30 seconds, until the front display of the servo amplifier displays the current Double-Click the  icon on your Windows desktop to start the software. You can work offline or online with DRIVE.EXE. Work ONLINE now. Select the interface where the servo amplifier is connected to.The software tries to communicate with the drive and to upload the parameters. If it's not successful, you receive this error message.

Frequent causes:

 wrong interface chosen wrong connector chosen at the servo amplifier interface is used by another software 24 V auxiliary voltage for the servo amplifier not working interface cable broken or wrong wiring Click OK to remove the error message. Detect and remove the error source. Restart the software.If communication works, parameters are transmitted from the servoamplifier to the computer. Then you see the start screen. Make sure, that the amplifier is disabled (Input HW-Enable connector X3 pin 15 must be 0 V or open)!

Superior products

ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series

BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables

Emerson -- modbus card, power panel, controller, power supply, base, power module, switchEPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor

FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch

GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card

HIMA --- DI module, processor module, AI card, pulse encoder

Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM cardMOOG - servo valve, controller, module, power module

NI --- Information acquisition card, PXI module, card, chassis multi-channel control card

WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module

Woodward - Regulator, module, controller, governor

YOKOGAWA - Servo module, control cabinet node unit