Home > Product > DCS control system > ABB DIS0006 2RAA005802A0003G 2RCA022748C module

  • ABB DIS0006 2RAA005802A0003G 2RCA022748C module
ABB DIS0006 2RAA005802A0003G 2RCA022748C module

ABB DIS0006 2RAA005802A0003G 2RCA022748C module

ABB DIS0006 2RAA005802A0003G 2RCA022748C module

SD setup is the development environment for the configuration, parameterization, tuning and programming of the drives ISD/SVM and IBD using the RS232 serial connection or a centralized connection through a fieldbus when the master controller is a controller of the FCT family. It is a software that combines various tools such as: - Instant monitor of the main variables of the system, but also of all the secondary variables through an access to vocabulary - Configuration of the system (such as configuration of the digitals I/O modules and the maximum limits of speed/ acceleration) - Updating of parameters and firmware - Auto-tuning and dedicated tuning of the current loops, speed and position, with help of procedures for self-esteem of the moment of inertia - Oscilloscope for the analysis of the variables - Tools for testing of basic movements (Function Generator) Finally, recalling that the systems are also programmable, SD setup is also proposed as a tool that allows editing and debugging programs written in IEC61131 type Structured Test.

Stepless drives and motors 

Stepless is the term used to identify the CMZ closed loop control of a stepper motor. This technology allows you to control the stepper motor with modulated current, eliminating the problem of the loss of the step and reducing the temperature of the motor. Considering that stepless solution provides higher torque at low speed (for the same size of the motor) with respect to the brushless solution, it makes stepless servo motor very suitable for particular applications at low speeds. The stepless solution is available as a stand-alone version composed by SVM, stepless servo drive, and by MM series, “motor encoder box”, or as integrated version ISD, both with the fieldbus CANopen, PROFIBUS, serial RS485 with MODBUS protocol or controlled in Step & Dir. The fieldbus CANopen DS402 allows ISD and SVM to be used with both the controllers of FCT family and with different controllers and especially with controllers that use the environment CODESYS 3.5 with Softmotion where you can choose ISD and SVM between the drives made available from CODESYS.

SD setup is the development

 environment for the configuration, parameterization, tuning and programming of the drives ISD/SVM and IBD using the RS232 serial connection or a centralized connection through a fieldbus when the master controller is a controller of the FCT family. It is a software that combines various tools such as: - Instant monitor of the main variables of the system, but also of all the secondary variables through an access to vocabulary - Configuration of the system (such as configuration of the digitals I/O modules and the maximum limits of speed/ acceleration) - Updating of parameters and firmware - Auto-tuning and dedicated tuning of the current loops, speed and position, with help of procedures for self-esteem of the moment of inertia - Oscilloscope for the analysis of the variables - Tools for testing of basic movements (Function Generator) Finally, recalling that the systems are also programmable, SD setup is also proposed as a tool that allows editing and debugging programs written in IEC61131 type Structured Test.

                                               

Superior products

ABB -- AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHEO0 3HNA00 DSOC series

BENTLY --- 3500 system/proximitor, front and rear cards, sensors, power modules, probes, cables

Emerson -- modbus card, power panel, controller, power supply, base, power module, switchEPRO --- Data acquisition module, probe, speed sensor, vibration sensor, shaft vibration transmitter, proximitor

FOXBORO - thermal resistance input/output module, power module, communication module, cable, controller, switch

GE --- module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card

HIMA --- DI module, processor module, AI card, pulse encoder

Honeywell --- Secure digital output card, program module, analog input card, CPU module, FIM cardMOOG - servo valve, controller, module, power module

NI --- Information acquisition card, PXI module, card, chassis multi-channel control card

WESTINGHOUSE --- RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module

Woodward - Regulator, module, controller, governor

YOKOGAWA - Servo module, control cabinet node unit

Obtain the latest price of ABB DIS0006 2RAA005802A0003G 2RCA022748C module