Analogue channel wiring Ensure the following connection requirements are met so as to guarantee the measuring accuracy of the device:
Use analogue cables with a braided shield.
Separate the laying of analogue cables and power cables. Where required, install metallic shielding in cable channels.
Earth the screen at the place where it enters the control cabinet.
Connect the screen close and directly with AGND.
A reading is taken from each input channel every millisecond, regardless of how many channels are actually in operation. Sampling rate Operating mode AI-PT 250 ms In operating mode AI-PT, calculations are carried out after the millisecond sampling rate. A new value is available in the user program every 250 ms.
If filtering is active
an average is calculated for the set time range. However a value is still issued during the sampling rate interval. For example, if the filter is set to 1,000, the average of the measurements for the previous 1,000 ms / 1,000 measurements is issued each millisecond (or, in the case of operating mode AI-PT, the average for the last 250 ms / 1,000 measurements). The filtering can be activated and configured using CODESYS V3. The sampling rate is constant. It can only be filtered with a whole multiple of the sampling rate.
If a voltage of ±10 V is applied to an AI (U), a plausible value is still given up to approx. ±15 V. The specified accuracy is only valid for the range – 10 to +10 V. From a voltage of ±16 V, the values are distorted considerably and from +23 V an error bit is set which can be queried in the application program.
Data of the analogue outputs
The analogue output is not active during device boot-up. Deviations from the zero value during switching on are approx. ≤ 1.5% of the signal range (voltage connected to open output for approx. 150 ms). During temporary interruptions – The analogue outputs are disconnected and lowresistance in the case of temporary interruptions to the power supply of > 10 ms.
Our products
A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components
Payment method and delivery
Shipment: EMS,DHL,UPS & FEDEX
Payment: T/T or Western Union