ABB YB560101-KL Integrated circuit module

 Only use the corresponding AGND for each voltage input. 

 Do not connect AGNDs from different channels. 

 Only use one channel per function: either AI (U) or AI (I). 

 Do not connect to the common GND. The required connections can already be found on the circuit board. 

 Cables to the analogue sensors/encoders should be connected as directly as possible (avoid the use of terminals and terminal blocks).

 Only use the corresponding AGND for each power input. 

 Do not connect AGNDs from different channels

2-wire measurement 

Resistance can result in a measurement error, which in the case of long cables with a small cross-section can be up to 10°. If the temperature of the sensor is known, this deviation can be subtracted and this way compensated through the software (alternatively, use 3-wire measurement). 3-wire measurement The nearest AI (U) connection is used to compensate the resistance in the cable. It can only be used directly in conjunction with the following AI (U/T) channel.

 Only use the corresponding AGND for each power input. 

 Do not connect AGNDs from different channels. 

 Only use one channel per function: either AI (U) or AI (I). 

 Do not connect to the common GND. The required connections can already be found on the circuit board.

example connection: voltage output

 Connect the voltage outputs directly to the input channel AGND. If direct connection to the AGND is not possible: connect the voltage input to the overall GND of the device. 

 AGNDs which are also used by other input channels should not be connected to the same terminal block in order to avoid changes in the voltage to the AO (U) and the temperature value. 

 Only use the corresponding AGND for each power input. 

 Ensure that the cable resistance is substantially lower than the load resistance RL so as to guarantee high measuring accuracy. Take into account the voltage divider between the load and cable resistance.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

Payment method and delivery

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T or Western Union