ABB YM322001-BZ Displacement drive clamp

Status displays The status display function is dependent on the software development environment used in conjunction with the device. The operating status LEDs show the current status of the power supply, the module mode and any error messages. The signals from the LEDs depend on the current operating status of the device: 

 CODESYS inactive: the firmware controls the LEDs. 

 CODESYS active: only the CODESYS runtime system (CODESYS Runtime) controls the LEDs. Location of the operating status LEDs The Run/Stop and Error LEDs display the system status.

Meaning of the LED displays 

 System statuses are shown using flashing signals on the Run/Stop LED in yellow. 

 CODESYS operating statuses are shown via continuous illumination of the Run/Stop LED in either red or green. 

 While the Run/Stop light is flashing yellow: the device is in use and must not be switched off. 

 The device does not show warnings via the LEDs during start-up

The time can be set via the web configuration page or the “SysTimeRTC Library” CODESYS library. Changing the battery The battery is not designed to be changed by the user; the manufacturer should be contacted in order to change the battery.

Unknown IP address 

If the IP address of the device is unknown, maintenance mode can be used to reconfigure it. 1st Reboot the device while pressing and holding S1 until the Run/Stop LED flashes every 2 seconds. The device is now in maintenance mode and can be reached via the default IP address. 2nd Connect to the device using the default IP address:  IP address: 169.254.255.XX XX corresponds to the last 2 digits of the device serial number. Exception: 00 becomes 100. 3rd Correct the network settings and make a note of them. 4. Restart the device. Maintenance mode is disconnected. The device is now configured and ready for use.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

Payment method and delivery

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T or Western Union