ABB 3BSE015086R1 controller

The temperature of the DKC heatsink will be monitored. If the temperature of the heatsink is too high, the drive will power down in order to protect against damage. Cause: 1. Ambient temperature is too high. The specified operational data is valid up to an ambient temperature of 45°C. 2. The DKC's heatsink is dirty. 3. Air flow is prevented by other assembly parts or a control cabinet panel assembly. 4. Heatsink blower may be defective Remedy: For 1. Reduce the ambient temperature; for example, through cooling of the control cabinet For 2. Remove any obstruction or dirt from the heatsink.

Motor Overtemperature Shutdown

 Description: Motor temperature has risen to an unacceptable level. As soon as temperature threshold (155°C) is exceeded, the drive will immediately be brought to a standstill as set in the error reaction (P-0-0119, best possible standstill).1. The motor was overloaded. The effective torque demanded from the motor was above its allowable continuous torque level for too long. 2. Break in line, ground short or short circuit in the motor temperature monitor line 3. Instability in the velocity loop

Bleeder Overtemperature Shutdown 

Description: The regenerated energy from the mechanism of the machine via the motor has exceeded the power capability of the bleeder resistor. By exceeding the maximum resistance energy, the drive will shutdown according to the set error reaction. Thereby protecting the bleeder from temperature damage. Cause: The reflected energy from the machine’s mechanism over the motor is too large. Remedy: With too much power ---> reduce the acceleration value With too much energy ---> reduce the velocity Check the drive installation. May require installation of an additional bleeder module.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

Payment method and delivery

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T or Western Union