ABB PFSK 107 YM322001-EE Channel isolation module

The display format of the torque data can be set with the help of the scaling parameter. The factor for the conversion of the torque data from the internal drive format into the display format (or the reverse process) is outside of the workable area.Connect the drive with a PC and start DriveTop. Select a scaling setting in the "Scaling/Mechanical system" dialog box. Should a scaling installation other than one from DriveTop be used, then the following parameters must be checked.All MKD and MDD motors contain feedback data memory. From this, the settings for the controller will be read. By processing these values, an error is detected.

Motor Feedback Initializing Error

A number of tests are performed when the motor feedback is initialized. An error was detected while doing this. This error can be: 1. Disturbance in the communication with the controller 2. Invalid offset between the high and low dissipating path 3. Error in the micro-controller of the measuring system Cause: 1. Defective motor feedback cable 2. Defective motor feedback 3. Defective measurement system interface Remedy: For 1. Check the motor feedback cable For 2. Exchange the motor For 3. Exchange the measuring system interface (module)

Command: Switch To Parameter Mode 

The command for transition is in parameter mode. While editing the parameters that can be edited only in parameter mode, this command must be processed The command for erasing errors, "S-0-0099, Reset Class 1 Diagnostics" was activated via the connected control system. All internal drive errors are erased. However, the errors must have been previously corrected.The command "S-0-0148, Drive Controlled Homing Procedure" was activated via the connected control system. The control drive automatically performs the internal drive homing procedure. Give the drive a start command to do this. Prior to this the drive must be enabled and in motion.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

Payment method and delivery

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T or Western Union