ABB PFSK 193 3BSC990116R1 Channel isolation module

The position control software of the INFO-Power PC Master independently controls up to 64 axes simultaneously. This software can be controlled in any required programming language. The axis parameters (control weights, norm factors, preselection values, etc.) are written via the INCO-DLL into the field bus master. The preselection values are indicated in the user-specific units such as degrees, meters or mm. The INFO-PPC Master controls and monitors the entire ramp and constant runs, brakes to the accuracy of an increment at the required point and maintains this point up to the next run command.

In addition the resolution of the encoder 

is extended by a software function by means of the four-quadrant method to 32- bit. Each axis is sampled every 500µs, and the control intervals last 4, 2, 1 or 0.5ms, depending on the number of axes. Speed changes during running, multiple axis trajectory runs (pull mode) are just as possible as premature termination or EMERGENCY OFF. Of course, it is also at all times possible to read the current position. Other modes: - Start-up mode (without fault monitoring) - Control and simulation mode (without feedback, open-loop control)

Board power

 supply For the board power supply, a 3-phase rectifier without electrolytic capacitor is sufficient. But to avoid malfunctions, a electrolytic capacitor of 4700 ... 10,000µF is recommended. The 24V power supply must pass through a line filter.DAC outputs - ±10V / 16-bit - Resolution 300µV/bit - Precision better than 10mV - Offset and gain correction in EEPROM (no pots) - Offset drift max. -1.8mV/degree - Gain drift max. ±0.15%/degree - Internal gain, offset drift and error of the motor end stage are automatically balanced by a software function in position control.

Our products

A company specializes in the sales of module spare parts of global famous brands (DCS system) (robot system) (large servo control system). The company's products include distributed control system (DCS), programmable controller (PLC), MOTOROLA MVME industrial module, industrial control communication converter (Anybus), remote output/input module (RTU), industrial computer (IPC), industrial low screen screen (IPC) HMI SCSI (50, 68, 80Pin) AnyBus (Gateway) has become a global sales enterprise of industrial automation spare parts and components

Payment method and delivery

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T or Western Union