ABB DI801 3BSE020508R1 Communication gateway module

The servo drive ARS 2000 SE with integrated STO function has a combined interface for control and acknowledgment via the plug connector [X40]. For further information on pin assignment and on the use of the STO function please refer to the Product Manual “STO (Safe Torque Off) for the servo drives ARS 2000 SE”.Supported functions  Load a parameter set (DCO file)  Save the current parameter set (DCO file)  Load a firmware file For more information on this subject, please contact the Technical Support.Only file and directory names according to the 8.3 standard are supported. 8.3 file and directory names have at most eight characters (letters or numbers) followed by a period “.” and a filename extension of at most three characters. File and directory names may only consist of upper-case characters and numbers.

BOOT-DIP-Switch

 During a restart/reset, the BOOT-DIP-Switch is used to determine whether to perform a firmware download from the SD-/MMC-Card or not. The position of the DIP-Switch is shown in Figure 8.  BOOT-DIP-Switch in position “ON”  firmware download requested  BOOT-DIP-Switch in position “OFF” firmware download not requested When there is no SD-/MMC-Card in the card slot of the servo drive and the BOOT-DIP-Switch is in the position “ON” (firmware download requested), the error 29-0 is triggered after a restart/reset. This error stops all further performances. This means that there is no communication possible via USB.

Definitions and terms

 Electromagnetic compatibility (EMC) or electromagnetic interference (EMI) includes the following requirements:  Sufficient immunity of an electrical installation or an electrical device against outside electrical, magnetic or electromagnetic interferences via cables or the ambient  Sufficiently small unwanted emission of electrical, magnetic or electromagnetic interference from an electrical installation or an electrical device to other devices in the vicinity via cables or the ambient

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.