ABB DI803 3BSE022362R1 Radial vibration module

The interference emission and interference immunity of a device always depend on the entire drive concept consisting of the following components: 

 Voltage supply 

 Servo drive 

 Motor 

 Electro mechanics 

 Execution and type of wiring 

 Superimposed control In order to increase interference immunity and to decrease interference emissions the servo drive ARS 2100 SE already comprises output chokes and mains filters, so that it can be operated without additional shielding and filtering devices in most applications.The ARS 2100 SE series servo drives are certified as per the product standard EN 61800-3 for electrical drive systems. In most cases no external filtering is required (see below). The conformity certificate for EMC directive 2004/108/EC is available from the manufacturer.

EMC areas: first and second environment

 Proper installation and wiring of all connecting cables provided, the ARS 2100 SE series servo drives fulfil the requirements of product standard EN 61800-3. This standard no longer refers to "classes", but to so-called environments. The first environment includes mains supply networks supplying residential buildings. The second environment includes mains supply networks exclusively supplying industrial buildings.

The signal lines must be as far away from the power cables as possible. They should not be placed parallel. If intersections cannot be avoided, they should be perpendicular (that is at a 90° angle), if possible  Unshielded signal and control lines should not be used. If their use is inevitable they should at least be twisted

EMC compliant cabling

 The following must be considered for an EMC-compliant setup of the drive system (see also chapter 8 Electrical installation, page 68):  In order to keep the leakage currents and the losses in the motor connection cable as small as possible, the servo drive ARS 2100 SE should be located as close to the motor as possible (see also the following chapter 8.14.5 Operation with long motor cables , page 108)  Motor cable and angle encoder cable must be shielded  The shield of the motor cable is connected to the housing of the servo drive ARS 2100 SE (shield connection terminal). The cable shield also has to be connected to the associated servo drive so that the leakage currents can flow back into the servo drive causing the leakage  The mains-end PE connection is connected to the PE connection point of the supply connection [X9]  The inner PE conductor of the motor cable is connected to the PE connection point of the motor connection [X6]

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.