ABB DP820 3BSE013228R1 Pulse Counter

Initial operation status Servo drives, which are sent to Metronix for service, will be equipped with a different firmware and other parameters for testing purposes. Before the next initial operation at the customer the servo drive ARS 2100 SE must be parameterised again. The parameterisation software Metronix ServoCommander® queries the initial operation status and asks the user to parameterise the servo drive. At the same time the device shows an “A” on the seven-segment display to indicate that it is ready but not yet parameterised.

Rapid discharge of the DC bus 

If the system detects a failure of the mains supply, the DC bus is rapidly discharged within the safety period in accordance with EN 60204-1. Delayed activation of the brake chopper according to power classes in the case of parallel operation and mains supply failure ensures that the main energy during rapid discharge of the DC bus is taken over through the braking resistors of the higher power classes. 11.1.10 Operating hours counter An operating hours counter is implemented, which has been designed for at least 200,000 operating hours. The operating hours counter is displayed in the parameterisation software Metronix ServoCommander® .

Operating mode and error display 

The system supports a seven-segment display. The following table describes the display and the meaning of the symbols shown:In the operation mode speed control the outer bars “rotate”, depending on the actual speed resp. the actual position of the rotor. If the drive is enabled, the central bar of the seven-segment display is on, too.Homing (“x“ stands for the currently active phase of the homing run). 0 : Search phase 1 : Crawling phase 2 : Positioning to zero position The numbers are successively indicated.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.