ABB EI811F Channel isolation module

Long horizontal pipes • Install on slightly ascending pipe section. 

• If not possible, make sure that the flow velocity is high enough to prevent air, gas or vapor to collect in upper part. 

• In partially filled pipes, the clamp-on flowmeter will report incorrect flow rates, or not measure.Make sure that the rail is not mounted at the highest point (risk for air bubbles) or at the lowest point (risk for particles) of the pipe.

Install an air vent downstream of the flowmeter to prevent vacuum. It may cause gases to come out of solution (cavitate) that prevent a proper measurement.Always install control valves downstream of the flowmeter in order to avoid cavitation or distortion of the flow profile.

Determine data and dimensions of pipe

• Use the supplied tape measure to determine the outside diameter of the pipe. 

• Determine the pipe wall thickness. A pipe wall thickness gauge or pipe tables can be used for this. 

• Find out what the material of the pipe is. 

• If the pipe has a liner, find out the liner material and the thickness of the liner.

When the UFC 300 P converter is started for the first time, the startup menu will be shown. In this menu, set the language, time and date. To show the menu again at the next startup, select "Settings and information  Device  Startup sequence?  Yes".

First time use, program the units in the converter

 If you use the converter for the first time, it will prompt you for the unit setting automatically. Otherwise go to menu number 2.4.1 ("Measurement  Setup  Units"). Choose in each line the required unit with the buttons as shown in the next table Normally, all settings are saved in a site file. To load the default values, load the default site file via "Measurement > Load site". If needed you can recover the factory settings for the site file via "Settings and Information > Load factory settings". Previous saved site files are kept during this process.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.