ABB HIEE200130R1 Pulse input card

Manually entering the temperature values • If there are no temperature sensors available for connecting, set the "Temperature input" to "Manual". • Set the location of the flow sensor (supply or return side of the installation) in order to calculate the correct specific heat of the liquid. 

• Check whether the shown fluid is correct.The type of fluid is set in the flow sensor installation wizard. In case the fluid is set to waterglycol mixture in the flow sensor installation wizard the concentration of glycol in water can be set in the heating/cooling setup menu.Go to menu 2.4.6 and select a counter for counting energy. Use counter 3 or 4 for energy measurements as they have a higher limit.

• At the "Function of counter", select "Sum" for counting both positive and negative energy flows. 

• Select "+ counter" for only counting positive energy flows

Start measurement 

The following parameters are available when heating or cooling measurement is switched on: • Temperature A/B • Temperature difference • Themal power (power) • Thermal energy (totalized power) To setup the display to view those parameters please refer to the display setup paragraph. The unit for energy measurement can standard be set to Joule (kilo, mega, giga), Wh (kilo, mega) or BTU (kilo, million (MM)). In case any other unit is required the free unit can be used. To setup the free unit go to "Measurement  Setup  Units ". Select the power or energy parameter, then select "Free unit". Enter the text for the unit, then the factor for the unit entered. The factor for energy is the amount of Joules in the free unit. The factor for power is the amount of Watt's in the free unit. Underneath you find a table with factors for alternative energy units.

Safety instructions

All work on the electrical connections may only be carried out with the power disconnected. Take note of the voltage data on the nameplate! DANGER! Observe the national regulations for electrical installations! WARNING! Observe without fail the local occupational health and safety regulations. Any work done on the electrical components of the measuring device may only be carried out by properly trained specialists. INFORMATION! Look at the device nameplate to ensure that the device is delivered according to your order. Check for the correct supply voltage printed on the nameplate.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.