The main products

Spare parts spare parts, the DCS control system of PLC system and the robot system spare parts,

Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts

3BHE009681R0101 GVC750BE101 Thyristor module

The UV 41 is a flame detector with UV tube in metal design for high mechanical stress. The flame detector is connected to the ionisation input of the MPA 41xx and is suitable for intermittent operation. For use in continuous operation applications, the UV 4x shutter is additionally required. The adapter UV4x-EM1/x must be used for mounting the UV 41. Other mounting adapters upon request.Installation The UV 41 (HE) must be mounted as closely as possible to the flame to be monitored. The UV 41 (HE) EM 1/3 adapter fits a 1" inspection tube; when mounting it, make sure that the rubber sealing ring enclosed with the UV 41 (HE) is inserted between the UV 41 (HE) and the mounting adapter. The UV sensor will also detect ex - ternal light as a flame, which is why the UV 41 (HE) must be mounted such that, for example, no daylight, ignition sparks or other flames can be detected. The UV 41 (HE) tube is sensitive to impacts, vibrations, etc., which is why it must be mounted without vibrating it. After the mounting work is complete, all screws must be checked for tight fit. If temperatures of more than 60 °C are reached at the UV 41 (HE), an adapter fitted with a quartz cover glass and, if necessary, an additional purging air connection must be used (upon request)

Attention 

The maximum allowed line lengths must not be exceeded. Supply and signal lines must be laid separately, as far as possible. Attention The flame detector UV 41 (HE) is delivered without cable screw con - nection. To guarantee the required traction relief and IP protection class IP 54, a cable screw connection M16x1.5 for cable diameters 5 - 9 mm is required (3 x 0.75 mm², which corresponds to an AWG of 20, to 3 x 1.5 mm², which corresponds to an AWG of 16). The protective earth conductor must be connected using an insulated female connector according to DIN 46245.

The FLW 20UV is a flame detector with UV tube in plastic design. The use of a UV tube guarantees that background radiation, for example from red-hot walls or parts of the mixing device, will not be detected. The flame signal intensity can be seen directly on the optical LED display of the flame detector. The FLW 20UV is connected to the ionisation input of the MPA 41xx and is suitable exclusively for intermittent operation. The FLW flanges are suitable for mounting