ABB SB520 3BSC760004R1 Battery Unit

The USB interface on the EPIC-2 is UHCI (Universal Host Controller Interface) compatible, which provides a common industry software/hardware interface. There are four USB 1.1 ports on J13 and J14 these are real world connectors. This connector uses IEC 61000-4-2-rated TVS components to help protect against ESD damage.Video Interface An on-board video controller integrated into the chipset provides high performance video output for the EPIC-2. CONFIGURATION The EPIC-2 uses a shared-memory architecture. This allows the video controller to use 16 Megabytes of system DRAM for video RAM. The EPIC-2 supports two types of video output, SVGA and LVDS Flat Panel Display

VIDEO BIOS SELECTION 

Jumper V3[5-6] can be removed to allow the system to boot off of the Secondary Video BIOS. Unlike the Primary Video BIOS, the Secondary Video BIOS can be reprogrammed in the field. SVGA OUTPUT CONNECTOR See the Connector Location Diagram on page 14 for pin and connector location information. An adapter cable, part number CBL-1007, is available to translate J2 into a standard 15-pin D-Sub SVGA connector. This connector uses IEC 61000-4-2-rated TVS components to help protect against ESD damage.

LVDS FLAT PANEL DISPLAY CONNECTOR 

The integrated LVDS Flat Panel Display in the EPIC-2 is a ANSI/TIA/EIA-644-1995 specification-compliant interface. It can support up to 24 bits of RGB pixel data plus 3 bits of timing control (HSYNC/VSYNC/DE) on the 4 differential data output pairs. The LVDS clock frequency ranges from 25 MHz to 85 MHz. The 3.3V power provided to pins 19 and 20 of J1 is protected by a 1 Amp fuse. See the Connector Location Diagram on page 14 for pin and connector location information.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.