ABB PM861AK02 3BSE018160R1 Thermal resistance card

Ground referenced logic input. (See Note 2) LOW - Selects forward-power leveling. HIGH - Selects an alternative power-leveling mode. Leaving this pin disconnected will ensure a LOW state. Note: The alternate power-leveling mode is selected via a software switch in a CALIBRATION menu. Either load-power leveling or an external source such as DC Bias may be selected. The default is Load Power Leveling The 37-pin Analog I/O Interface is optically insulated from the generator at the interface control board interconnect point. Therefore to use this interface card the customer system needs to source power the interface board on pins 36 and 37.If the generator is in digital remote mode (via 9 pin port for RS-232), it cannot switch to analog remote mode until the digital remote mode is disabled. Therefore setting this pin low will have no effect until the digital remote mode is disabled.

GENERATOR FAULT (E)

Emitter side of isolated transistor switch. (See Note 1) Transistor ON - Generator fault. Transistor OFF - No fault. Signal Definition: Generator Fault = generator overheat condition or interlock broken. 10 INTERLOCK This pin should connect to Pin 35 to complete the interlock chain. If the interlock chain is broken the AC contactor will open. External circuit should be capable of switching 100mA at 24VAC.

15-pin Analog I/O Interface 

The 15-pin Analog I/O Interface is an option (not yet available) to provide a proper interface to a system previously connected to an ENI generator with a 15-pin Analog Interface. The pin-outs for this interface have not been defined at this time. Please contact your nearest ENI Sales and Service Office for more information

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.