GE IS210AEBIH2BEC Combustion engine control module

The front panel for your generator comes in three variations: blank, fully functional, or remote. The type of front panel is specified at the time when the unit is ordered from ENI. Pictures of the three types of front panels for the GHW-25 and GHW-50 are shown on the following pages.A blank front panel contains no controls and must be connected to either an external control source or the remote front panel described below.The user can control and operate the GHW-25 / GHW-50 Genesis generator directly if it has a fully functional front panel.Remote Front Panel A remote front panel allows the user to place the generator in a rack system and control the generator remotely. It has the same controls and operates in the same way as a generator with a fully functional front panel.

Rear Panel

This connection provides for water to flow into the generator for cooling purposes. It is designed for 3/8” male (NPT) pipe thread. Water Out This connection provides for water to flow out of the generator for cooling purposes. It is designed for 3/8” male (NPT) pipe thread. RF Output Provides RF power to the plasma chamber. The type of connector is specified at the time the unit is ordered (See Section 1.2). Water Flow Readback This two-pin connection is provided to enable the DSP controller to monitor the condition of water flow into and out of the generator. 24V Solenoid Supply This two-pin connection is provided for use with the optional solenoid kit available.

External Interlock 

This two-pin safety interlock must be shorted to allow the generator to operate. A plug is provided in the accessories kit to allow the interlock to be shorted. Removal of the plug disables the interlock. Analog I/O Interface The analog interface uses a 25-way DB25F connector but can also be any interface specified by the customer. Customized interface cards can be installed. A safety interlock exists in pins 10 and 23. (Other Interfaces are supported) DC Bias Input This connector has a SMB type jack for DC Bias Leveling feedback. AC Input This connection is used to provide the AC power to the unit. Because of the switchable power supply inside the generator, a range of voltages from 180VAC to 440VAC can be used. The power must be three phase 47-63Hz at 15A per phase for 180- 230VAC and 10A per phase for 342-440VAC.

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.