YASKAWA YPCT11077-1A Radial vibration module

These two connections are for two optional fiber optic cables (one to send data and one to receive data) to connect the generator to an optional remote front panel. Remote Front Panel This connection is a six pin modular connector. Serial Interface This interface is used to connect the generator to a terminal. The standard is a Subminiature Type D 9-pin digital connection. External RF Input This connection is optional and is a SMB jack used for an external RF source. Customized interface cards can be installed. RF Sync This connection is used to link two generators together so the output RF is in the same phase.

Rear Panel Drawing

 Figure 2.8.3a shows the rear panel for the GHW-25 / GHW-50 Genesis Generator and calls out each of the connectors as described in the table from the previous page. In order to maintain EMC compliance, wires to external interlock plugs (Ext. Interlock, 24V Solenoid Value and Water Flow Readback) must be wound 3 times on a Ferrishield (ENI P/N 552030) Ferrite (or equivalent), positioned as close to the rear panel as possible.The factory set line voltage is indicated on a label attached to the back wall of the generator.

AC Mains Connection 

Connection to the AC Input is simple; just plug the AC line into the AC input receptacle on the back of the generator. The Genesis Generators use a switchable power supply capable of supporting voltages from 180-230VAC for domestic versions and 342-440VAC for international versions (not currently available). Both ranges are at three-phase 47-63Hz at with 30A per phase for 180-230VAC and 15A per phase for 342-440VAC. No rewiring for different voltages is necessary. Unlike a single in-line power transformer that require different tap settings for different voltages, the Genesis Generators use a switchable power transformer which accept a wide variety of voltages eliminating the need to change tap or wiring settings. The center pin of the AC input is connected to the generator chassis and must be connected to the frame ground through the AC distribution panel of the system

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

Do you want to know about our products?

We have a large amount of inventory and high quality, out of production control system components, DCS system accessories, robot system accessories, large servo system spare parts. PLC module, DCS module, CPU module, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module, redundancy module, power module, relay output module, relay input module, processor module and other major brands.