Home > Product > DCS control system > ABB CE4T-10R-02 Scram Button Switch

  • ABB CE4T-10R-02 Scram Button Switch
ABB CE4T-10R-02 Scram Button Switch

ABB CE4T-10R-02 Scram Button Switch

ABB CE4T-10R-02 Scram Button Switch

The surface temperature of the motor can reach 100°C in operation. Check (measure) the temperature of the motor. Wait until the motor has cooled down below 40°C before touching it. Make sure that, even if the drive starts to move unintentionally, no danger can result for personnel or machinery. Check the assembly and orientation of the motor. Check the drive components (clutch, gear unit, belt pulley) for the correct seating and setting (observe the permissible radial and axial forces). Check the wiring and connections to the motor and the servo amplifier. Check that the earthing is correct. Test the function of the holding brake, if used. (apply 24V, the brake must be released).

Check whether the rotor of the motor revolves freely

 (release the brake, if necessary). Listen out for grinding noises. Check that all the required measures against accidental contact with live and moving parts have been carried out. Carry out any further tests which are specifically required for your system. Now commission the drive according to the commissioning instructions for the servo amplifier. In multi-axis systems, individually commission each drive unit (servo amplifier and motor).

Delivery package, transport, storage

 maintenance, disposal Delivery package:— Motor from the 6SM27..107 series — Technical description (documentation), 1 copy per delivery — Motor package leaflet (short info) Transport: — Climate category 2K3 to EN 50178 — Transport temperature—25...+70°C, max. 20K/hr change — Transport humidity rel. humidity 5% - 95% , no condensation — only by qualified personnel — only in the manufacturer’s original recyclable packaging — avoid shocks — if the packaging is damaged, check the motor for visible damage. — Inform the carrier and, if appropriate, the manufacturer.

                                           

Company introduction

Temporal Ming sheng automation equipment co., LTD. Was established in April 02, 2021, registered jiujiang ruichang city in jiangxi province, east yi road no. 23 lake farmers 401 mall, the legal representative person Zhou Zuochen.

[Main Products]

Main products: PLC and DCS system spare parts modules of world famous brands

①Allen-Bradley 17561746174717711785

②Schneider 140 Series PLC module

③General electric GE

IC693 IC697 IC698 Series PLC module

DS200 DS3800 DS215 IS200 IS215 IS220 Series gas turbine module

VMIVME Control module of series

④Bently3500 series cards 3500/22M3500/153500/92 And other products

⑤ICS TRIPLEX

⑥ABB Robots. FANUC RobotsYASKAWA RobotsKUKA RobotsMitsubishi RobotsOTC RobotsPanasonic RobotsMOTOMAN Robots

EMERSONSpare parts for OVATION system, WDPF system and MAX1000 system.

⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, Zui modern fault-tolerant controller based on triple module redundancy (TMR) structure.

Woodward505 series governor 9907-164 And other products

⑩Bosch RexrothIndramatI/O module,PLC CPU,Motors, drives and other products. 

◆MotorolaMVME 162MVME 167MVME1772MVME177and other products.

Obtain the latest price of ABB CE4T-10R-02 Scram Button Switch