One VD signal is generated for a trigger pulse. A picture is used as the first field (odd) picture. Two trigger pulses are input, and the standby time required until the second trigger pulse is input corresponds to the exposure time. A long-time exposure field picture is obtained by lengthening the interval of a trigger signal. R.R 2 mode Two VD signals are generated for a trigger pulse. The second field (even) picture that is output later is used in these modes. The sensitivity becomes double in case of use in the field accumulation. R.R 3 mode Three VD signals are generated for a trigger pulse.
The second field (even) picture
that is output secondly and the first field (odd) picture that is output thirdly are used in these modes. These modes are used for field accumulation interlacing. R.R 4 mode Four VD signals are generated for a trigger pulse. The first field (odd) picture that is output thirdly and the second field (even) picture that is output fourthly are used in these modes. A picture is interlaced for frame accumulation, and a vertical resolution of 485(575) lines are obtained. When two trigger pulses are input and the interval of the second trigger pulse is lengthened, the first frame picture of the trigger pulse is used as a long-time accumulation picture. These modes are used for frame accumulation interlacing.
Long-Time Exposure
The long-time exposure up to 128 frames can be carried out at low-speed shutter mode at on-screen menu. The XC003/003P automatically calculates the integration time corresponding to the frame numbers on the menu,and outputs continued frame images. The long-time exposure also can be available with Restart Reset function. For this function,2 trigger pulses are required;one for starting the integration, the other for ending it. Field or frame output is available by Restart Reset mode setting.
Company introduction
Temporal Ming sheng automation equipment co., LTD. Was established in April 02, 2021, registered jiujiang ruichang city in jiangxi province, east yi road no. 23 lake farmers 401 mall, the legal representative person Zhou Zuochen.
[Main Products]
Main products: PLC and DCS system spare parts modules of world famous brands
①Allen-Bradley 1756、1746、1747、1771、1785
②Schneider 140 Series PLC module
③General electric GE
IC693 IC697 IC698 Series PLC module
DS200 DS3800 DS215 IS200 IS215 IS220 Series gas turbine module
VMIVME Control module of series
④Bently:3500 series cards 3500/22M、3500/15、3500/92 And other products
⑤ICS TRIPLEX
⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。
⑦EMERSON:Spare parts for OVATION system, WDPF system and MAX1000 system.
⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, Zui modern fault-tolerant controller based on triple module redundancy (TMR) structure.
⑨Woodward:505 series governor 9907-164 And other products
⑩Bosch Rexroth:Indramat,I/O module,PLC CPU,Motors, drives and other products.
◆Motorola:MVME 162、MVME 167、MVME1772、MVME177and other products.