Home > Product > DCS control system > ABB IEMU11 Dual channel assembly module

  • ABB IEMU11 Dual channel assembly module
ABB IEMU11 Dual channel assembly module

ABB IEMU11 Dual channel assembly module

ABB IEMU11 Dual channel assembly module

TO TEST 1. Make sure the control valves are in the “OFF” position, and turn the gas supply “ON”. 2. Check all connections from the natural gas regulator and supply valve up to and including the connection to the manifold pipe assembly (the pipe that goes to the burners). Soap bubbles will appear where a leak is present.3. If a leak is present, immediately turn off the gas supply and tighten leaky fittings. 4. Turn the gas back “ON” and recheck. 5. Should the gas continue to leak from any of the fittings, turn off the gas supply and contact customer service at 1-800-554-5799. 6. If it is evident there is excessive abrasion or wear, or the hose is cut, it must be replace prior to the outdoor cooking gas appliance being put into operation.

GAS FLOW CHECK Each 

grill burner is tested and adjusted at the factory prior to shipment. However, variations in the local gas supply may make it necessary to adjust the burners. Flames should be blue and stable with no yellow tips, excessive noise or lifting. If any of these conditions exist, first check to see if the burner is blocked by dirt, debris, spider webs, etc. If the burners are clear of foreign objects or debris, please contact customer service at 1-800- 554-5799 for further assistance

Only those parts recommended by the manufacturer should be used on the grill. Substitutions will void the warranty.

INSTALLER FINAL CHECK 

… Specified clearance maintained of 24 inches from combustible materials/construction. 

… All internal packaging has been removed. 

… The hose and regulator are properly connected. 

… The unit has been tested and is free of leaks. 

… The gas supply shut off valve has been located. 

… All burners are factory installed. 

… Keep the instruction manual with the grill for future reference.

                                           

Company introduction

Temporal Ming sheng automation equipment co., LTD. Was established in April 02, 2021, registered jiujiang ruichang city in jiangxi province, east yi road no. 23 lake farmers 401 mall, the legal representative person Zhou Zuochen.

[Main Products]

Main products: PLC and DCS system spare parts modules of world famous brands

①Allen-Bradley 17561746174717711785

②Schneider 140 Series PLC module

③General electric GE

IC693 IC697 IC698 Series PLC module

DS200 DS3800 DS215 IS200 IS215 IS220 Series gas turbine module

VMIVME Control module of series

④Bently3500 series cards 3500/22M3500/153500/92 And other products

⑤ICS TRIPLEX

⑥ABB Robots. FANUC RobotsYASKAWA RobotsKUKA RobotsMitsubishi RobotsOTC RobotsPanasonic RobotsMOTOMAN Robots

EMERSONSpare parts for OVATION system, WDPF system and MAX1000 system.

⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, Zui modern fault-tolerant controller based on triple module redundancy (TMR) structure.

Woodward505 series governor 9907-164 And other products

⑩Bosch RexrothIndramatI/O module,PLC CPU,Motors, drives and other products. 

◆MotorolaMVME 162MVME 167MVME1772MVME177and other products.

Obtain the latest price of ABB IEMU11 Dual channel assembly module