ABB SDCS-REB-1 PULSE INTERFAC

TO LIGHT THE GRILL BURNER 1. Make sure all the knobs are in the “OFF” position, and then turn on the gas supply from the liquid propane cylinder. 

2. The electronic igniter is built into the valve. To ignite the main burners, simply press and turn the control knobs to the “IGNITE/HI” setting. The ignition system will “click” as the electrode generates a spark. This spark will ignite the burner 

3. If the burner does not light, turn off the gas supply, wait 5 minutes for any excess gas to dissipate and then try again. 

4. If the burners still do not light, follow the match Lighting instructions on page 16

TO LIGHT THE ROTISSERIE BURNER

 1Open the lid, and press the knob for about 5 seconds without turning it. This will allow time for gas to flow into the rotisserie burner. 

2. The electronic ignition is built into the valve. To ignite the rear burner, simply press and turn the control knob to the “IGNITE/ON” setting. The ignition system will “click” as the electrode generates a spark. This spark will ignite the rotisserie burner. After ignition, hold in the knob for 15 seconds and release. 

3. If the burner does not light, turn the control knob to the “OFF” position. 

4. If the igniter does not function, wait 5 minutes for any excess gas to dissipate, and follow the instructions on page 16 for match lighting.

FLAME CHARACTERISTICS

 Check for proper burner flame characteristics. Each burner is adjusted prior to shipment. However, variations in the local gas supply may make minor adjustments necessary.

Burner flames should be blue and stable with no yellow tips, excessive noise or lifting.

Company introduction

Temporal Ming sheng automation equipment co., LTD. Was established in April 02, 2021, registered jiujiang ruichang city in jiangxi province, east yi road no. 23 lake farmers 401 mall, the legal representative person Zhou Zuochen.

[Main Products]

Main products: PLC and DCS system spare parts modules of world famous brands

①Allen-Bradley 1756、1746、1747、1771、1785

②Schneider 140 Series PLC module

③General electric GE

IC693 IC697 IC698 Series PLC module

DS200 DS3800 DS215 IS200 IS215 IS220 Series gas turbine module

VMIVME Control module of series

④Bently：3500 series cards 3500/22M、3500/15、3500/92 And other products

⑤ICS TRIPLEX

⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。

⑦EMERSON：Spare parts for OVATION system, WDPF system and MAX1000 system.

⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, Zui modern fault-tolerant controller based on triple module redundancy (TMR) structure.

⑨Woodward：505 series governor 9907-164 And other products

⑩Bosch Rexroth：Indramat，I/O module,PLC CPU,Motors, drives and other products. 

◆Motorola：MVME 162、MVME 167、MVME1772、MVME177and other products.