Standard Contact Blocks — Molded, phenolic construction. Enclosed silver contacts with reliability “nibs” that improve the reliability of switching performance under dry circuit, corrosive atmosphere and fine dust conditions. For more extreme conditions, the Logic Level contact blocks described below are recommended.Logic Level Contact Blocks — Feature palladium contacts. Palladium, which is more inert than gold, is well suited for voltages and currents approaching zero. When mounted in an enclosure rated for highly corrosive environments, logic level contact blocks can be used where exposure to chemicals may cause failure to other types of materials.
Markings and Legend Plates
Buttons or Lenses with Non-standard Horizontal Markings Markings not listed as STANDARD MARKINGS below are considered nonstandard. If more than one marking is required on a button or lens, order non-standard markings. Ordering Instructions
■ Specify Catalog Number of blank button or lens of desired color, plus Suffix “STAMP” for Non-standard or “STD” for Standard markings in Order Notes. See Pages 47-105 – 47-107.
■ Specify size, legend desired and location in Order Notes by alphas as shown in example.
■ Do not exceed maximum number of legend characters per line. Ordering Example: Green Type B button to be marked with non-standard legend “ALL ELEVATORS DOWN.”
Buttons or Lenses with Non-standard Vertical Markings
Ordering Instructions ■ Specify Catalog Number of blank button or lens of desired color, selected from listings on Pages 47-105 – 47-107. ■ Specify size, legend desired, location and state “vertically marked” in Order Notes. Note: Specify either 1/8 or 3/16 inch (3.2 or 4.8 mm) character height. Do not exceed maximum number of characters as outlined in table below
Legend plates for Type E30 Compact Pushbutton and Indicating Light operators hook directly onto the operator and are clamped in place when the operator locking nut behind the panel is secured. Two and three span plates are designed for use where two or more operators are mounted adjacent to each other on minimum horizontal mounting centers. These legend plates mount in the same manner as single span units.
Company introduction
Temporal Ming sheng automation equipment co., LTD. Was established in April 02, 2021, registered jiujiang ruichang city in jiangxi province, east yi road no. 23 lake farmers 401 mall, the legal representative person Zhou Zuochen.
[Main Products]
Main products: PLC and DCS system spare parts modules of world famous brands
①Allen-Bradley 1756、1746、1747、1771、1785
②Schneider 140 Series PLC module
③General electric GE
IC693 IC697 IC698 Series PLC module
DS200 DS3800 DS215 IS200 IS215 IS220 Series gas turbine module
VMIVME Control module of series
④Bently:3500 series cards 3500/22M、3500/15、3500/92 And other products
⑤ICS TRIPLEX
⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。
⑦EMERSON:Spare parts for OVATION system, WDPF system and MAX1000 system.
⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, Zui modern fault-tolerant controller based on triple module redundancy (TMR) structure.
⑨Woodward:505 series governor 9907-164 And other products
⑩Bosch Rexroth:Indramat,I/O module,PLC CPU,Motors, drives and other products.
◆Motorola:MVME 162、MVME 167、MVME1772、MVME177and other products.