ABB DSTD 306 DSTD306 Power module

General outputs - 12 open collector discrete outputs under software control. Each output can sink a maximum of 100 mA. Maximum off voltage is 16 volts. One of the 12 outputs can be pre-defined for MOTOR MOVING status. Encoder I/O - The external encoder I/O port permits interfacing to quadrature type encoder signals for applications such as electronic gearing. This input can also be configured by software as a step and direction input. Note: Factory default is for quadrature encoder inputs. Step/Dir Out - The Step/Dir output permits controlling external devices so they can follow step and direction from the 6445. This output signal is present as long as the 6445 is enabled and executing any motion profile.

Your responsibility 

As the user or person applying this unit, you are responsible for determining the suitability of this product for any application you intend. In no event will Pacific Scientific Company be responsible or liable for indirect or consequential damage resulting from the use of this product.

• Be careful of the motor terminals when disconnected from the motor. With the motor disconnected and power applied to the drive, the motor terminals have high voltage present. • DO NOT use the enable input as a safety shutdown. Always remove power to the drive for a safety shutdown.

To avoid possible personal injury

 whenever you are working with the 6445: • DO NOT power up the unit without the cover on and the chassis tied to earth ground. Note: This is normally done by connecting the motor’s case ground to J3-5 of the 6445 and connecting J1-3 of the 6445 to earth ground. These pins are marked by a symbol on the silkscreen and are shown on the diagram on page 2-8. • DO NOT operate the unit without the motor case tied to earth ground. • Always remove power before making or removing connections from the unit. • Before removing the cover of the unit, shut off power and allow the unit to sit for 5 minutes to discharge the bus capacitors.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

after-sales

Professional sales electric brand products around the world

Products overseas direct purchase, quality goods inventory, price concessions

After-sales warranty, models complete, the same product, different price and service.