Select a standard 8-inch (205 mm) deep or greater NEMA (National Electrical Manufacturers Association) enclosure appropriate for industrial applications. CAUTION The internal cabinet temperature should not exceed 50o C (60o C with derating). If the cabinet is ventilated by filtered or conditioned air make sure to prevent the accumulation of dust and dirt on the unit’s electronic components. The air should also be free of corrosive or electrically conductive contaminants.
Select a cabinet position that meets these guidelines:
• Flat, solid surface capable of supporting the approximate 6.0 lbs. (2.7 kg) weight of the unit.
• Free of excessive vibration or shock.
• Minimum unobstructed space of four inches (10 cm) at the fan input on the unit bottom and the exhaust on the unit top.
• Operating temperature of: 0 to 50 degrees C at full rated current Mounting procedure Bolt the unit to the cabinet using the three slots (refer to the dimensions figure) using a #10 (M5 metric equivalent) bolt.
Power dissipation for cabinet
The 6445 dissipates power causing cabinet heating. Power dissipation is determined by a number of factors, such as output current, motor winding impedance, input step rates, and idle current reduction. The 6445 is factory preset for 5 amps/phase current and idle current reduction enabled. For an estimate of the power dissipation for use in calculating cabinet cooling requirements, use the values shown:The eight input/output connectors are: • J1-120 or 240 Vac power • J3-Motor • J6-External 66 Vdc output
Company product range
----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------
PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module
Network communication module,
Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output
Module, redundancy module, power module, relay output module, relay input module, processor module
after-sales
Professional sales electric brand products around the world
Products overseas direct purchase, quality goods inventory, price concessions
After-sales warranty, models complete, the same product, different price and service.