ABB GJR5250500R5101 23KT92 Pulse input module

For the 4-lead standard systems motor with MS connector, build and install the cable using guidelines that follow. Cable requirements Use 18- to 16-gauge stranded wire for the cabling. Obtain cable with each winding pair (refer to diagram) twisted at about 3 to 4 turns per inch (1 to 1.5 turns per centimeter). Make sure the cable contains a lead for grounding. As an option, the cable may be shielded to reduce radiated noise. If a shield is used, connect as shown for pre-built cables. Cabling diagram The colors referenced in the diagram follow the Pacific Scientific stepper motor color code.

8-Lead Motor, Series Connected 

Introduction For an 8-lead motor to be wired in series, build and install the cable using guidelines that follow. Cable requirements Use 18- to 16- gauge stranded wire for the cabling. Obtain cable with each winding pair (see diagram) twisted at about 3 to 4 turns per inch (1 to 1.5 turns per centimeter). Make sure the cable contains a lead for grounding. As an option, the cable may be shielded to reduce radiated noise.Do not pre-tin (solder) the tips of the cables going into the PCD connector. This can result in a loose connection.

Serial I/O Connections

 The serial port transmits and receives RS-232 or RS485-multidrop serial communication for the user interface of your unit. You can configure to control single or multiple 6445s. Single- and multi-unit control • For controlling a single 6445, use RS-232 communications. DIP switch S2 must be set to Address 31 for RS-232 Communications as described in Section 3.2. • For controlling multiple 6445s, RS-422 or RS-485 communications permits a single PC to host from 1 to 31 6445s (each requiring a unique address ranging from 0 to 30, set using DIP switch S2 as described in Section 3.2). • The 6445 utilizes 9600 baud communications with one start bit/one stop bit and eight bit word length in either RS-232 or multidrop format.

Company product range

----------------------Ruichang Mingsheng Automation Equipment Co., Ltd----------------------

PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module

Network communication module,

Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output

Module, redundancy module, power module, relay output module, relay input module, processor module

after-sales

Professional sales electric brand products around the world

Products overseas direct purchase, quality goods inventory, price concessions

After-sales warranty, models complete, the same product, different price and service.