Home > Product > Robot control system > METSO IOP303 Semiconductor module

  • METSO IOP303 Semiconductor module
METSO IOP303 Semiconductor module

METSO IOP303 Semiconductor module

METSO IOP303 Semiconductor module

SV-M/S front panel controls are shown in Figure 5-1. They consist of a 3 character 7 segment LED display and 3 push buttons used for scrolling through lists and for the entry of parameter values.The display can be used to indicate: •Parameter values •Status values •Error numbers At power up the display will indicate ‘OFF’ or ‘RUN’ depending on whether the motor is energised. An error is reported if ‘E’ appears in the display. To program the drive using the front panel controls, you will need to follow the programming sequence shown in Figure 5-2. When just ‘P’ is showing in the display, the drive parameters can be viewed or changed. When ‘S’ is showing (actioned by pressing the ‘-’ button from the parameter set-up mode), status values can be viewed.

A particular parameter

 can be viewed by returning to the ‘P’ mode and pressing the ‘Enter’ button. Using the increment or decrement buttons (‘+’ and ‘-’ buttons) select a particular parameter (say ‘P15’) and view the contents by pressing ‘Enter’. At this stage the contents of the selected parameter can be changed using the ‘+’ and ‘-’ buttons. Once you have entered the required value press ‘Enter’ to return to parameter selection. Note: Parameters P1 to P9 cannot be changed using the front panel controls. Status values can be viewed in a similar way as parameter values, but you cannot alter status values, they are read-only. At the end of programming, the drive can be set to ‘Run’ by pressing ‘+’ from parameter set-up or ‘-’ from status read. * Run indicates the drive is energised, “off” is displayed if the drive is de-energised.

Changing Parameter Sets

 The drive can store two totally independent sets of parameters in addition to the default values. This allows rapid changeover to an alternative setup or pre-configuration for two different applications. It also allows experimentation without losing the normal configuration. The two parameter sets are referred to as set 0 and set 1. They are stored in two memories, only one of which is active (A). The second memory (B) is a back-up memory to hold the second parameter set.

                                          

Common problem

We have this product in stock, and we can deliver it to you at any time when you need it badly.

*The warranty period of all products is 1 year, which has passed the professional test certification.

*If you need to order more than one product, please contact us, and we can offer you a discount.

*We only use HDL  UPS  and other express delivery methods to deliver spare parts.

*If you find that other suppliers offer lower prices for the same products, we are also willing to offer you further discounts based on their prices.

If you have any other questions, please feel free to contact us via email.

*Please let us know if you need any spare parts, we can give you further assistance, and we are waiting for your inquiry.

Obtain the latest price of METSO IOP303 Semiconductor module