XYCOM XVME-203/1 Overspeed detection module

The length resulting from one motor revolution to be run is entered here if the encoder ratio is not to be given especial consideration (parameter A102 = 0001 0001). If the gear ratio is entered in parameter A102, then the feed constant is the circumference of the draw-off roll.The maximum possible bipolar acceleration describes the maximum allowed acceleration symmetric for both directions (accel and decel). Limitations for this can be set in parameter A109 or via command ACC and DEC. A jerk limit can also be activated in parameter A110. (See function description: ELC).

A115 Monitoring

The position control loop is constantly monitored. The maximum tolerable offset can be input in this parameter as a per cent value. If the allowed offset is exceeded, then an error message is generated. If the monitor is, however, deactivated and the allowed offset exceeded, then no error message is issued, but the programmed output is switched off.If the input signal programmed here fails, then feed motion is not possible. Any running feed is terminated and a fault message generated. Interruption: If the input signal programmed here fails, then a feed in progress is interrupted. If the input is re-set, then the residual feed is completed without the need of a new start signal.

B009 Serial Inputs and Outputs

Via the serial interface, inputs X4 and outputs X5 can be read and written using the BTV04. The transmission rate is determined by the type of transmission and the baud rate. The cyclic transmission is monitored by the control. If no new telegram is received within the maximum cycle time, the control generates the following warning or error: • E-0105 No serial real-time communication • F-0317 Serial real-time communication error

Quality assurance service

1. We provide high-quality parts of various brands, and you will find full

The model meets your needs.

2. For models that have been out of production for many years, we have all hard to find parts, so we can directly find us to solve all problems for you at one time.

3. If you are in a hurry to use this product, we can dispatch it for you.

4. All products can enjoy a one-year warranty service,

5. Our products are new and unused.

6. If you need a large quantity, you can contact us and I can offer you a discount.

7. You can ask me about the price and more information about the product via email. We welcome you