XYCOM XVME-240 Temperature Monitor Module

System control can also take place via the serial interface. Then, cyclic transmission of the system inputs and outputs via the serial interface is monitored. If no new telegram is received within the maximum cycle time, the following warning or error is generated: • E-0104 No system control possible • F-0316 System control error The warning E-0104 is generated when system control takes place via the serial interface and the control is in 'Parameter' mode. The error F-0316 is generated when system control takes place via the serial interface and the control is in 'Manual' or 'Automatic' mode.

Keep these instructions in a safe and easily accessible place.

• Turn OFF and then disconnect AC power and DC voltage sources before servicing the charger/rectifier. 

• Turn OFF DC breaker, if present, or AC power if not, prior to connecting the battery and/or the load. 

• Only qualified personnel should do maintenance, attempt repairs or program the charger/rectifier. 

• Use of an accessory not recommended or sold by the manufacturer may result in risk of fire, electrical shock or personal injury. 

• Electrostatic sensitive components are used in this equipment. Proper ESD (electrostatic discharge) procedures must be executed to prevent any damage of the electronic components. 

• Batteries generate explosive gases during their normal operation. Never smoke or allow an open spark or flame in the vicinity of the battery.

• Before using the charger/rectifier

read and follow the batteries’ and any other involved equipment’s safety, installation instructions and cautionary markings. • Never attempt to charge a frozen battery. 

• Do not expose charger/rectifier to rain, snow or other damps unless purchased with the appropriate NEMA/IP rating. • Do not install or operate a dropped or otherwise damaged charger/rectifier. 

• Refer to your national and/or local electrical code for the installation regulations. 

• Remove watches, bracelets or anything of that nature before working on the charger/rectifier. 

• Do not touch any uninsulated parts or components when the power is ON. 

• Do not install the charger/rectifier over a battery or a combustible surface. 

• Do not obstruct the ventilation openings or the airflow space.

Quality assurance service

1. We provide high-quality parts of various brands, and you will find full

The model meets your needs.

2. For models that have been out of production for many years, we have all hard to find parts, so we can directly find us to solve all problems for you at one time.

3. If you are in a hurry to use this product, we can dispatch it for you.

4. All products can enjoy a one-year warranty service,

5. Our products are new and unused.

6. If you need a large quantity, you can contact us and I can offer you a discount.

7. You can ask me about the price and more information about the product via email. We welcome you