Home > Product > Robot control system > XYCOM XVME-244 Dynamic pressure monitor

  • XYCOM XVME-244 Dynamic pressure monitor
XYCOM XVME-244 Dynamic pressure monitor

XYCOM XVME-244 Dynamic pressure monitor

XYCOM XVME-244 Dynamic pressure monitor

• Provide and ensure the appropriate ventilation 

• Do not start servicing the unit until at least five minutes have elapsed after turning it OFF and disconnecting all AC and DC supplies. Let the capacitors discharge. 

• GROUNDING This equipment should be permanently grounded in compliance with all national and/or local codes and ordinances.Unpack and examine the charger/rectifier for completeness of the shipment according to the packing slip, and transportation damage. If your equipment arrived damaged, submit a report as a damage claim to the carrier within 24 hours.

STORAGE 

If the charger/rectifier has to be stored before commissioning, it should be stored in a dry place, in the ambient temperature within –40o F to 185o F (-40o C to 85o C), not exposed to direct sunlight, on the same pallet, protected against moisture, dust, dirt and damage. Do not use the charger/rectifier as a stocking shelf. Remember that storing the charger/rectifier for a long time greatly deteriorates performance of the filter capacitors, which will dry out in about two years without being powered up.

LOCATION 

The charger/rectifier has to be installed indoors in a well-ventilated area, where the temperature is within 32o F to +122o F (0o C to 50o C), and non-condensing humidity is not higher than 95%. Should you require the charger/rectifier to operate outdoors or in a moist, cold, rain, under direct sunlight, etc.; the charger/rectifier must be purchased with the appropriately rated enclosure, which will provide the adequate environmental protection for your equipment.To prevent personal injuries and/or equipment damage execute handling with care, using appropriate lifting equipment. By default, the charger/rectifier is to be lifted and moved with a forklift or jigger unless purchased with the lifting eyebolts.

                                          

Quality assurance service

1. We provide high-quality parts of various brands, and you will find full

The model meets your needs.

2. For models that have been out of production for many years, we have all hard to find parts, so we can directly find us to solve all problems for you at one time.

3. If you are in a hurry to use this product, we can dispatch it for you.

4. All products can enjoy a one-year warranty service,

5. Our products are new and unused.

6. If you need a large quantity, you can contact us and I can offer you a discount.

7. You can ask me about the price and more information about the product via email. We welcome you

Obtain the latest price of XYCOM XVME-244 Dynamic pressure monitor