SEW DFS56L-TF-RH1M-KK Differential expansion module

Setting Droop for an Isolated Load 1. Open the OPEN FOR DROOP switch (or disconnect the wires from terminals 13 and 14). 

2. Start the engine and adjust the speed for rated with no load. 

3. Apply full load. 

4. Adjust the DROOP potentiometer to give the desired speed. Example: Operating at 60 Hz, 57 Hz at full load indicates 5 percent droop. If only 50 percent loading is possible, 58.5 Hz would indicate 5 percent droop

Setting Droop for an Infinite Bus  

1 With the generator not paralleled, adjust the speed above rated frequency by the percent droop required (set engine at 63 Hz for 5 percent droop on a 60 Hz system).

 2. Mark the speed setting potentiometer position or measure dc voltage on TB27(+) and TB26(–), and re-adjust the engine speed for rated frequency. 

3. Turn the DROOP potentiometer fully clockwise for maximum droop. 

4. Synchronize the generator with the bus and parallel it with the bus. 5. Increase the speed setting potentiometer to the position marked in step 2, increasing load. 6. Slowly adjust the DROOP potentiometer counterclockwise, decreasing droop, until 100 percent load is obtained.

The Load Sharing Module senses 

the power output of a generator and provides a ±3 Vdc signal to the speed control to adjust the power output of the enginegenerator set to match the reference power level. The Load Sharing Module can also produce a droop condition (instead of isochronous load-sharing), making it possible to connect the generator set in parallel with either a generator set which is running isochronously, or with an infinite bus.If it is necessary to set the droop without pulling 100 percent load, set the engine speed accordingly for the desired percent of droop at the load to be pulled. For example: Five percent droop at 50 percent load will require a no load rated speed of 61.5 Hz, not 63 Hz, on a 60 Hz system.

Quality assurance service

1. We provide high-quality parts of various brands, and you will find full

The model meets your needs.

2. For models that have been out of production for many years, we have all hard to find parts, so we can directly find us to solve all problems for you at one time.

3. If you are in a hurry to use this product, we can dispatch it for you.

4. All products can enjoy a one-year warranty service,

5. Our products are new and unused.

6. If you need a large quantity, you can contact us and I can offer you a discount.

7. You can ask me about the price and more information about the product via email. We welcome you