This interface is intended for the connection of a PC for programming and parameterization. It is designed as a type B socket. It is also compatible with USB 2.0 (maximum data rate of 3 Mbit/s).
Installing SE352/SE352M control unit
1 Switch off the power supply to the BT356 card rack or SB35x system box and allow for a discharging time of 10 seconds.
2. Insert the SE352/SE352M control unit in the respective slot in the BT356 card rack or SB35x system box. 3. Tighten the knurled bolts on the front. Make sure that the front panel is flush to the BT356 card rack or SB35x system box by tightening the knurled bolts
If you use the components in an existing system as a replacement or an extension, you must install the firmware that is used in the system. The firmware versions and service packs created up to the time of delivery can be found on the system stick. If newer firmware versions and service packs have been created before commissioning, they can be downloaded from the Rexroth homepage.
Commissioning
Before commissioning, check that the plug connections are firmly fitted. Proceed as follows for commissioning: 1. Check whether the battery is correctly seated in the battery holder. If not, insert a battery according to the instructions in Section “9 Maintenance and repair” on page 26. 2. Insert the SE352/SE352M control unit in the card rack or system box. 3. If necessary, insert IMxxx interface modules in the SE352/SE352M control unit. 4. Close off slots that are not occupied with interface modules using dummy panels. 5. Turn on the voltage supply for the card rack or system box. 6. Connect the operating computer and set the time with the BS350. 7. Configure the interfaces and program the tightening system.
Application industry
The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing
Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/