APPLIED 0090-00223 Interface module

The common functions are as follows: 

1) Activation/deactivation of relay for output A on an alarm condition - (N/O, N/C) 

2) Time limited activation/deactivation of output A. The time limit can be set within the range 1..10 secs at intervals of 1 sec. 

3) Activation/deactivation of relay for output B on an alarm condition - (N/O, N/C) 

4) Time limited activation/deactivation of output B. The time limit can be set within the range 1..10 secs at intervals of 1 sec. 

5) Delayed cancellation of inhibit function. The delay can be set within the range 0..40 secs at intervals of 1 sec.

Set AL8-2 to programming status:

 Press the PRG button. This button is slightly countersunk when compared with the front plate, and a thin, sharp tool like e.g. a small screwdriver, a needle or the like must be applied to press this button. Do not use a pencil. The lead may break and fall behind the front plate. After having pressed the PRG push-button, the LED below the pushbutton will be lit (green), indicating that the alarm panel has been set to the programming status and that programming may be started. The LED for "DELAY OF ALARM" (i.e. "POWER ON") is switched off when the unit is set to programming status.

When pressing the channel selector CHANNEL SELECT

the LED for channel 1 (INPUT 1) is switched off and the LED for channel 2 (INPUT 2) is lit (green), etc. First step of the programming is thus to select input channel. When the requested input channel is indicated, i.e. the relevant LED is lit (green), the FUNCTION SELECT pushbutton is pressed. NOTE: The LED for the selected input channel will continue being lit (green) throughout the complete programming procedure for the relevant channel. FUNCTION SELECT points to the individually programmable functions in the following order: 1: N/O, N/C 2: OUTPUT A, OUTPUT B 3: INHIBIT 4: CABLE FAILURE 5: DELAY OF ALARM

                                                                        

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/