APPLIED 0090-00224 Monitor module

By pressing the FUNCTION SELECT push-button, the LEDs switch from one indication to the other – thus changing the function. When the indication of the LEDs shows the requested function, this is entered into the programme memory by pressing the ENTER push-button. Pressing ENTER results in the next function in the order being automatically pointed to: selection of output relay.

Pressing the FUNCTION SELECT

 push-button will cause a change from the actual LED indication/function to the next in the order, and so the FUNCTION SELECT push-button is pressed, till the requested function is indicated by the LEDs. The requested function is entered into the programme memory by pressing the ENTER push-button. Pressing ENTER results in the next function in the order being automatically pointed to: Inhibit function.Pressing FUNCTION SELECT causes a change from one function to the other. When the required function is indicated, enter this into the programme memory by pressing ENTER. Pressing ENTER results in the next function in the order being automatically pointed to: Alarm on cable failure.

The LED for "DELAY OF ALARM" indicates the actual function as follows

Pressing FUNCTION SELECT causes a change from one indication/function to the other. When the required function is indicated, enter this into the programme memory by pressing ENTER. If immediate registration of an alarm condition was selected (i.e. LED for "DELAY OF ALARM" is lit with red light), the programming of this input channel is hereby finished. If so, you are back at the beginning of the programming routine, i.e. at selection of channel (by means of CHANNEL SELECT) and the channel selector points to – i.e. green light still in the LED for – the channel for which the programming has just been finished. This is made as it is easier to change a just entered but unwanted function of the relevant channel.

                                                                        

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/