APPLIED 0100-00396 Speed module

: As the LED indicating which channel is selected – and being presently programmed – is also applied to indicate the basic time delay, it will flash, green or red depending on whether the actual time is included (green) or not (red) in the actual time delay. Press FUNCTION SELECT until the requested basic time – 0..10 secs – is indicated by the LEDs marked 1-10. Enter the basic time into the programme memory by pressing ENTER. The LEDs for additional time will not be lit until the basic time has been entered.

SELECTION OF ADDITIONAL TIME

 When the basic time has been entered by pressing ENTER, the LEDs marked "+10" and "+20" are lit. The LEDs for basic time will remain lit. Pressing FUNCTION SELECT causes a change from one indication/function to another. So press FUNCTION SELECT, until the requested additional time is indicated, and enter the time into the programme memory by pressing ENTER. The complete programmed time delay is the sum of basic time and additional time. The programming of the presently selected channel is hereby finished. After the last pressing of ENTER, only one LED (apart from the one for "PRG") is lit (green): the LED for the input channel for which the programming has just been finished.

You may now choose between 3 possibilities: 

1) Select a new input channel by means of CHANNEL SELECT and continue programming one or more functions as described above. 2) Programming of one or more common functions is requested. For description of this part of the programming, please see the following pages. 3) Terminate the programming by pressing PRG. The unit returns to normal function. Only the LED for "DELAY OF ALARM" will then be lit (green), as this LED is applied for indication of "POWER ON" after the front sheet has been mounted. NOTE: If one or more input channels are not to be applied, this/these channels should be programmed to N/O and no alarm on cable breakage (i.e. the LED for "CABLE FAILURE" is red). On delivery, all input channels have this status.

                                                                        

Application industry

The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing

Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/