The KTY sensor is used for temperature measurement and monitoring the motor winding. Because the KTY sensor provides an analogue temperature measurement, it is also possible to protect the actuator grease from temperature overload. Temperature sensors used in the FHA-C-H Actuator Series meet the requirements for safe separation according to EN50178.
Position measuring system option EC
The FHA-C Hollow Shaft Servo Actuators Series are ideally suited for equipping with a single turn absolute measuring system that can be connected directly to the actuator output. The ECN113 single turn absolute encoder is connected to the actuator flange by means of a torsionally stiff hollow shaft.The encoder system is connected using a standard signal connector. The evaluation of the compatibility of the measurement system must be checked prior to commissioning. The measuring system contains electrostatically sensitive components, please observe the ESD measures.
Transport and Storage
The transportation of the servo actuators and motors should always be in the original packaging. If the servo actuators and motors are not put into operation immediately after delivery, they should be stored in a dry, dust and vibration-free environment. Storage should be for no longer than 2 years at room temperatures (between +5° C ... +40° C) so that the grease life is preserved.Check the performance and protection and check the suitability of the conditions at the installation site. Take suitable constructive measures to ensure that no liquid (water, drilling emulsion, coolant) can penetrate the output bearing or encoder housing
Application industry
The products can be used in the following industries: power plant, paper making, steel, mining, rubber, water supply, cement, chemical industry, glass, printing
Textile, machinery, plastics, coatings, medicine, hospitals, food, hotels, scientific research institutions
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/