ABB 70BA01C-S HESG447260R2 Pulse input module

To move the guide or actuator manually. To adjust system parameters. Actuator selector key Selection of an actuator and the components assigned to the actuator. If the application permits, up to three actuators can be selected. IMPORTANT Before changing the settings on the CDP-01 (shifting sensor guide point, adjusting system gain etc.) first select the relevant actuator using key 20.These instructions are for standard applications. For special applications see other instructions provided with order. Connect CDP as shown in Fig. 1 of this chapter. Sensor selection must correspond to the selected drive.

Press Sensor key until Sensor LED 10 (Port X1) is lit. 

Verify that the correct sensor is selected for drive 1 by blocking a portion of the sensor viewing area and noting whether the LED bar graph changes. If the LED bar graph does not change check correct sensor connections and repeat verification process..Press Sensor key until Sensor LED 9 (Port X2) is lit. Verify that the correct sensor is selected for drive 2 by blocking a portion of the sensor viewing area and noting whether the LED bar graph changes. If the LED bar graph does not change select another sensor and repeat verification process.

Three Drive Center Guiding CDP-01-MMM

 These instructions are for standard applications. For special applications see other instructions provided with order. Connect the CDP as shown in Fig. 3.Verify that the correct sensors are selected for drive 1 by blocking a portion of each sensor’s viewing area and noting whether the LED bar graph changes. If the LED bar graph does not change check and correct sensor connections and repeat step cVerify that the correct sensors are selected for drive 2 by blocking a portion of each sensor’s viewing area and noting whether the LED bar graph changes. If the LED bar graph does not change check and correct sensor connections and repeat step e.

                                                                        

Brand display

 ABB、GE/FUANC、FOXBORO、TRICONEX 、BENTLY、A-B、EMERSON 、MOTOROLA、XYVOM、HONEYWELL 、REXROTH、KUKA、NI、DEIF、Yokogawa、WOODWARD、Reliance Electric、SCHNEIDER 、MOOG、PROSOFT、KOLLMORGEN、ICS TRIPLEX、HIMA

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/