ABB HIEE320639R1 CPU card

Set the assignment of the direction of motion to the +/- keys. A side-effect is that all sensor guide points of the selected actuator are set to center. The sensor guide point can be re-adjusted subsequently In AUTOMATIC and MANUAL modes the LED bar graph indicates the web motion within the sensor proportional band. The assignment of the direction of display to the web motion can be altered separately for each sensor. Important Before this assignment is changed the guide direction of the actuator (page 7-16) and the assignment of the +/- key (page 8-4) must be correctly set, as those two settings also affect the direction of display

ENCODER SETTINGS 

The CDP-01 offers the option of equipping each actuator with an encoder for position detection. This enables position monitoring and evaluation. In most applications the encoder is used in conjunction with a sensor positioning assembly. Encoder settings are usually pre-set at FIFE factory, so that resetting is not necessary. In the case of spare parts deliveries the CDP-01 is not normally pre-set.

Defining Displacement Limits, Limiting Stroke 

The internal displacement limits for the position of the selected actuator are set and standardized. The displacement and stroke of that actuator is limited. IMPORTANT The servo center transducer must be located in the adjacent range of motion, so that the center position can also be reached in Servo Center mode. DANGER New crushing and shearing points may be created by changing or cancelling the stroke limitation, and/or mechanical stops may be damaged or destroyed.

                                                                        

Brand display

 ABB、GE/FUANC、FOXBORO、TRICONEX 、BENTLY、A-B、EMERSON 、MOTOROLA、XYVOM、HONEYWELL 、REXROTH、KUKA、NI、DEIF、Yokogawa、WOODWARD、Reliance Electric、SCHNEIDER 、MOOG、PROSOFT、KOLLMORGEN、ICS TRIPLEX、HIMA

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/