ABB UNS0868B-P 3BHE013940R0002 Digital output module

The RGPC keys can be switched ON/OFF for the Manual and Servo Center modes by pressing F1. The LED in the F1 key is lit when the function is active. g. The shift range of the RGPC can be set to 40% by pressing F2. The LED in the F2 key is lit in this case. When the LED is not lit the factory default setting is in effect. For web edge sensors with small proportional bands the shift range is usually pre-set to 81%. h. The key assignment of the RGPC can be altered by pressing the + or - key. The LED bar graph indicates the key assignment. + LED = default. - LED = key assignment reversed

Control by Web Speed 

Couple the reaction speed of the guide to the web speed. Settings can only be made on actuator 1, but the setting is also valid for other actuators. IMPORTANT This control function must be ordered separately. Please refer to your order confirmation to check on the specific product package.For the alarm outputs delay times are set and the function of the outputs is inverted. Only possible for actuator 1.

Setting Oscillation

 The oscillator function is only effective if the CDP-01 has been specially configured for it prior to delivery. Pressing F1 activates the oscillator function. The following two settings are possible: • Set amplitude. The size of the web displacement is set (left/right motion of web). • Set oscillation frequency. The number of web displacements over a certain time period is set.

                                                                        

Brand display

 ABB、GE/FUANC、FOXBORO、TRICONEX 、BENTLY、A-B、EMERSON 、MOTOROLA、XYVOM、HONEYWELL 、REXROTH、KUKA、NI、DEIF、Yokogawa、WOODWARD、Reliance Electric、SCHNEIDER 、MOOG、PROSOFT、KOLLMORGEN、ICS TRIPLEX、HIMA

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/