HONEYWELL 10012/1/2 Power AC module

HONEYWELL 10012/1/2 Power AC module

HONEYWELL 10012/1/2General Conditions of Safe Use • Provision shall be made to limit power supply transient voltages to less than 140% of the peak rated power supply voltage. • This equipment shall be used in an environment of not more than Pollution Degree 2 (as defined in EN 60664-1). • For installation in North America, this equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D, or Class I, Zone 2, HONEYWELL 10012/1/2Group IIC, or non-hazardous locations only. • For Class I Division 2, A, B, C, and D classified locations, this open-type equipment shall be installed within an enclosure that is suitable for the environment, requires a tool or key to open, and meets the requirements of the applicable codes.HONEYWELL 10012/1/2

For US/Canada Zone 2 classified locations, this equipment HONEYWELL 10012/1/2shall be installed within an enclosure UL/cUL certified for Zone 2, and for European Union Zone 2 classified locations, this equipment shall be installed within an ATEX Zone 2 certified enclosure. The enclosure should have a minimum ingress protection rating of at least IP54 (as defined inHONEYWELL 10012/1/2), only be accessible by use of a tool, and meet the requirements of applicable codes. • All wiring shall be installed using suitable Class I Division 2 or Zone 2 wiring methods in accordance with the National Electrical Code (ANSI/NFPA 70), the Canadian Electrical Code, or other local codes as applicable, in accordance with the authority having jurisdiction. Refer toHONEYWELL 10012/1/2 Intrinsically safe electrical systems for guidance.

Related products：

HONEYWELL CC-PDO801 Voltage output module

HONEYWELL 51304685-100 Embedded controller

HONEYWELL 10266S-1-020-200-1-0-00000-100-00 module