HONEYWELL 10106/2/1 Line interface module

Encoder meter steps are lost as a result of: - mechanical movement when the system is switched off. - faulty encoders/encoder cables. - faulty mechanical connection of the encoder’s actuator elements (toothed belts, pinions). CHECKING Activate Center mode. If the selected actuator cannot reach its center transducer (middle LED on LED display does not light up), the actuator’s stroke limitations must first be deactivated.

Display System Gain 

The system gain can be displayed on the LED bar graph, from 0 to 40 1/s. Automatic calibration must have first been successfully completed. a. Set Manual mode. b. Press Setup key. c. Press +/- keys simultaneously. Check: LED (13) flashes. d. Press F1 and F2 simultaneously. Check: LEDs (4, 5, 13) flash. e. Press Setup key twice. Check: LEDs (4, 5, 13 and 16) flash. f. Press Sensor key repeatedly until relevant sensor LED lights up. LED bar graph indicates system gain in 1/s for the selected sensor mode. g. Return to Manual mode.

Press Setup key 3 times.

 Check: LEDs (4, 5, 13 and LED of actuator key 20) flash. The LED bar graph indicates the actuator/motor type. For a detailed description of how to read the actuator/motor type from the LED bar graph, see Table 11-1 further on. g. The firmware is displayed by pressing F1. For a detailed description of how to read the firmware from the LED bar graph, see the example in Figure 2 further on. h. The firmware revision is displayed by pressing F2. For a detailed description of how to read the firmware revision from the LED bar graph, see the example in Figure 2 further on.

                                                                        

Brand display

 ABB、GE/FUANC、FOXBORO、TRICONEX 、BENTLY、A-B、EMERSON 、MOTOROLA、XYVOM、HONEYWELL 、REXROTH、KUKA、NI、DEIF、Yokogawa、WOODWARD、Reliance Electric、SCHNEIDER 、MOOG、PROSOFT、KOLLMORGEN、ICS TRIPLEX、HIMA

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/