Honeywell 10208/1/1 Voltage module

External Input Devices RGPC-20, RGPC-21 The sensor guide point can be shifted more easily with the external input device RGPC-20 or RGPC-21. RCAL-20, RCAL-21 The sensor calibration can be adjusted more easily with the external input device RCAL-20 or RCAL-21. Ordering Note For each spare parts order the part numbers, drawing numbers and type designation of the signal amplifier must be quoted. They are found on the enclosure underneath the line connection socket, or on the side.

Servo Center Transducer/Position Encoder Inputs (up to 3)

 Servo center transducer input for connection of ISCT-01/02/03. Quadratic incremental position encoder input (phases A and B): Low level: 0 ... 1.8 V. High level: 9.6 ... 12 V. Load 12 mA in switching, 0.001 A static. Maximum frequency 10 KHz. +11.4 V ± 10% available at ports. Max. 300 mA (component of +12 V supply).

Getting Started

This chapter provides a step-by-step introduction to setting up the PC830. This procedure uses the minimum possible equipment to run an unloaded motor and sets motor speed from a PC’s serial port. It is strongly recommended that all first time users go through this procedure to become familiar with the PC830 and the PC interface software before installing the servo system in a machine.

                                                                        

Brand display

 ABB、GE/FUANC、FOXBORO、TRICONEX 、BENTLY、A-B、EMERSON 、MOTOROLA、XYVOM、HONEYWELL 、REXROTH、KUKA、NI、DEIF、Yokogawa、WOODWARD、Reliance Electric、SCHNEIDER 、MOOG、PROSOFT、KOLLMORGEN、ICS TRIPLEX、HIMA

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/