ABB CMA124 3DDE300404 Monitor module

All registration moves must be tied to a dedicated registration input on either Input 4 (J2-34) or Input 5 (J2-35). Select No Function for either Input 4 or Input 5 on the Digital I/O Tab.Click on the Predefined Moves tab. Setup an Incremental Registration move. The registration move is the number of counts set in the Distance Offset window. This move is activated by the user as active on the rising or falling edge of this input.

Jog Moves

 A motor is mechanically linked to a pulley (with a 1.91 inch diameter) which drives a conveyor at 50 in/sec. The motor rotates the pulley at a constant speed to feed products past a scanning station. Occasionally, the drive will be required to run the conveyor at two additional speeds (100 in/sec and 25 in/sec) to meet production needs and running different products through the scanning station.

VelCmd2 is a storable serial velocity

 command that will be used to set the speed for Velocity1. Velocity2 and Velocity3 will obtained by use of the analog input on the PC830. Either the user can provide their own external analog signal OR make use of the drives ability to produce an analog offset (using ADOffset). For this example, ADOffset will be set to 1 volt. This will be used to calculate the appropriate scaling factor to scale this analog signal into a speed reference.Note: If an external analog signal is provided to vary the analog input, then a wide range of jogging speeds are possible.

                                                                        

Brand display

 ABB、GE/FUANC、FOXBORO、TRICONEX 、BENTLY、A-B、EMERSON 、MOTOROLA、XYVOM、HONEYWELL 、REXROTH、KUKA、NI、DEIF、Yokogawa、WOODWARD、Reliance Electric、SCHNEIDER 、MOOG、PROSOFT、KOLLMORGEN、ICS TRIPLEX、HIMA

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/