ABB PM554-TP-ETH Channel relay module

you can switch on or off the monitoring of the DTE voltage, for both ports together, with the DTEPower-Monitor switch. – ON: monitoring of the DTE voltage active, data transmission only possible if DTE voltage available. – OFF: no monitoring of the DTE voltage, data transmission always possible. – State of delivery: switch in position 0 (OFF), i.e. no monitoring of DTE voltage.

ASSEMBLING MEDIA MODULES

 Media modules can be assembled and disassembled during running operation. 

□ To fasten a media module, first remove the protective cap over the plug of the MICE. 

□ Plug the media module onto the plug. 

□ Tighten the 4 screws on the corners of the media module. 

□ Check whether the switch pre-setting suits your requirements. 

□ Fit the signal lines.

ASSEMBLING SFP MODULES 

□ To fasten a SFP module, first remove the protective cap over the socket. 

□ Insert the SFP module with the closed lock into the socket until you hear it snap in.

                                                                        

Professional seller

Professional sales of major electrical brand products in the world

Overseas direct purchase of products, authentic inventory, price concessions

After sales warranty, complete models, same products, different prices and services

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/