Connect the PoE voltage to the 3-pin terminal block (included in the scope of delivery), as shown in the following figure. Make sure that your installation complies with the following conditions: – Length of the supply line < 3 m. – Cross-section of the supply lines is dimensioned for 1.5 A Mount the terminal block for the PoE supply voltage on the bottom side of the PoE module via snap lock. Push it until it locks into position. Note: Use 4-pair twisted pair cables for connecting the data terminal equipments. Only connect data terminal equipments which are conform to IEEE 802.3af.
• Suitable for the monitoring of trunk piston
diesel engines with in-line and V-type engines running at medium and high speed.
• Oil Mist Detection via a pipe sampling system and an indication which side of the engine the oil mist level has risen to dangerous levels.
• If localization ofthe high oil mistis required,theVN116/87 can replace the VN115/87 with minimal modification.
visatron® VN215/87plus
• Suitable for the monitoring of crosshead engines running at medium and slow speed, because the oil mist spreads out from the damaged compartment more slowly than in the case of trunk piston engines.
• Damage detection through the individual compartment suction pipe system, displaying the relevant compartment giving the alarm
Professional sales of major electrical brand products in the world
Overseas direct purchase of products, authentic inventory, price concessions
After sales warranty, complete models, same products, different prices and services
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/