MOTOROLA MVME259E input module

The VME-PROF-S will activate the SYSFAIL signal-line and lit the LED VMEbus/F, after power-on or RESET, until the VME-PROF-S’s firmware (DPS) is enabled (see chapter 4.1). 3.3.5.2. SYSRESET The VME-PROF-S firmware will be reset (disabled) from an active SYSRESET-signal. 3.4. J2-Bus / Slot depending addressing The VME-PROFI-S Version 5.0 or higher did not feature a slot depending addressing

Enabling of the VME-PROF-S 

After Power-on or SYSRESET the VME-PROF-S will start it’s Monitor program. To start the DPS firmware the Main-VMEbus-CPU must write a $08 at the VMEbus-address $8F000F1 to enable the DPS firmware. 1 A23 - A16 of the VME-PROF-S´s VMEbus-Standard base address are set with the S21 /S20 (see chapter 2.1.1). In the following description, the default base address ($8F0000) are always used. Writing $00 will disable the firmware.

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/