MOTOROLA MVME2604-1151A displacement speed module
Slave configuration For the configuration of the DP-Slave the following parameters must be available. The following table shows witch parameter must be set by the user or is detected automatically by the firmware. All with „set by user“ marked parameters must be set, before the DP-Slave software is enabled by writing $01 to „Status If the baudrate changes, the DPS firmware must be disabled and then enabled again to start the automatically baud rate detection!
The Configuration can consists from up to 32 configurations-bytes.
The resulting input length must be £ 244 byte and resulting output length must be £ 244 byte. Together up to 400 I/O-bytes could be configured. InputLn, OutputLn The InputLn and OutputLn are automatically set by the firmware. Uparln The VME-PROF-S didn’t need user-bytes. Therefore Uparln should be set to $00. Uparam[32] The VME-PROF-S didn’t need user-bytes (= Uparam). In case of a simulated DPSlave, user-bytes can be send from the Master. This bytes are ignored from the VMEPROF-S.
We mainly make spare parts for DCS, PLC, robot control system and large servo system.
Main products: various modules/cards, controllers, touch screens, servo drives.
Advantages: professional off production accessories,
Fast delivery, accurate delivery time,
Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands
This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/