MOTOROLA MVME172-313A Monitor module

Connector Pin Out: The input connector consists of a Removable Terminal Block with the Rockwell Automation Part Numbers 1756- TBCH (36 position cage clamp) or 1756-TBS6H (36 position spring clamp). The terminal block is not supplied with the 7264 module.

Wiring Notes 

• Use the information provided by the sensor’s manufacture to determine the type and maximum length of cable that should be used to connect the sensor to the 7264 module. 

• When plugged into the 7264 module, pin 1 is located in the upper right hand corner. 

• Pins 2 and 20 are not connected to the PC board. It is intended as a convenient place to connect the +24Vdc external supply to the SSI sensors. Only consider the sensor(s) current requirements when sizing this power supply as the 7264 module does not use and is not connected to the external +24Vdc supply. 

• GND 1 through GND 4 (pins 3, 4, 21, and 22) are internally connected together and must be connected to the +24Vdc supply’s common. 

• Earth Grounds 1 through 6 (pins 1, 13, 14, 19, 31, and 32) are internally connected together and are connected to the ControlLogix rack structure. The cable shields of the sensor’s cable should be connected to these terminals

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/