MOTOROLA MVME117-4 Gas monitor

Linear displacement transducers from Balluff and MTS have resolutions measured in µm/count. The 7264 module can easily convert this data into the more familiar US Customary system of inches. The table below shows the Multiplier and Divisor values needed to convert from various metric resolutions to US Customary resolutions. For example, to convert data from a LDT sensor with 5µm/count resolution to 0.0005inch/count resolution, use a Multiplier of 50 and a Divisor of 127.

Preset Value: 

The zero position of the SSI encoder’s Data Value may not match the zero position of your machine. The Preset Value parameter gives you the ability to offset the Data Value from the actual SSI data to a value that will be more useful for your application. Programming the Preset Value parameter does not change the Data Value. It is stored in the 7264 module’s memory until the module sees a zero to one transition of the Apply Preset bit. Apply Preset: Offsetting the Data Value to the Preset Value is a two step operation. First, a Message Instruction must be used to send the Preset Value with the other setup parameters to the 7264 module. Second, setting the Apply Preset in the output registers will change the Data Value to the Preset Value.

                                                                        

Advantage products

We mainly make spare parts for DCS, PLC, robot control system and large servo system.

Main products: various modules/cards, controllers, touch screens, servo drives.

Advantages: professional off production accessories,

Fast delivery, accurate delivery time,

Main brands include ABB, GE/FANC, FOXBORO, TRICONEX, BENTLY NEVADA, A-B, EMERSON, OVATION, MOTOROLA, XYVOM, HONEYWELL, REXROTH, KUKA, NI, DEIF, Reliance Electric, Yokogawa, WOODWARD, SCHNEIDER, MOOG, PROSOFT and other brands

This article from the temporal Ming sheng automation equipment co., LTD., reproduced please attach this link: http://www.stockdcs.com/